Mx5France https://www.mx5france.com/forum/ |
|
[REV9 Autosport] Group Buy : Kit Jenvey IRTB https://www.mx5france.com/forum/viewtopic.php?f=113&t=11293 |
Page 1 sur 1 |
Auteur : | Max @ REV9 [ Mer 31 Août 2011, 04:09 ] |
Sujet du message : | [REV9 Autosport] Group Buy : Kit Jenvey IRTB |
*** MESSAGE EN ANGLAIS, VEUILLEZ RÉPONDRE AU SUJET S'IL Y A DES QUESTIONS!!!*** ![]() Hey everyone! I'm sure all of you will enjoy this offer I worked out with Simon @ Jenvey Dynamics. Many of us wanted a neat IRTB kit but couldn't find anything near plug and play. Well, Jenvey listened to us and made IRTB manifolds for NA 1.6 & NB 1.8 (NA 1.8 being tested at the moment). Price is the same for all year Roadsters! ![]() ***NOTE THAT THE CARBON FIBER TRUMPHETS COST MORE*** REV9 IRTB Kit (by Jenvey) includes the following: -Full IRTB Kit & Matching Manifold for your vehicle year -Fuel Rail -Linkage Kit -Linkage Braket & Rod TB Over -Throttle Position Sensor -Air Control Valve Kit (4 port) Retail : $1999.99 Price (1-5 buyers) : $XXXX Price (6-10+ buyers) : [COLOR="red"]$XXXX[/COLOR] We're trying our best to give good deals to our customers and if the exchange rate gets better, we will try even harder! There are tons of options that can be available, too! A last picture for your viewing pleasure... ![]() ********************************************************* UPDATED 30/08/11 READ IF YOU NEED ECU ********************************************************* I've talked with an electronic engineer who's actually making plug and play MegaSquirt for major Miata tuners and he could make a setup for the JENVEY IRTB users. Basically, this person owns a 2002 Miata and does have JENVEY IRTB on his vehicle. He can make a customer's ECU based on his requirements based on the MS2V3: -Alternator control -P/S Idle up -A/C Idle up -Progressive overheating warning through CEL -800/1000rpm idle with/out A/C -A/C cutoff at WOT and/or high RPM -Basemap for JENVEY IRTB ... and the list goes on. The ECU will be made to order so it fits your car and has the options you need. The maker told me he can make it so your car doesn't feel like a sketchy race car, but like if it was OEM and comfortable. PRICE 1-5 : $750.00 + (low) shipping PRICE 6-9 : $XXX + (low) shipping PRICE 10+ : $XXX + (low) shipping ********************************************************* OFFICIAL BUYER LIST ********************************************************* JENVEY NA 1.6 IRTB KIT 1. Good Enough 2. 3. 4. 5. JENVEY NA 1.8 IRTB KIT 1. Venice 2. 3. 4. 5. JENVEY NB 1.8 IRTB KIT 1. 2. 3. 4. 5. |
Auteur : | ToM57730 [ Jeu 1 Sep 2011, 18:27 ] |
Sujet du message : | Re: [REV9 Autosport] Group Buy : Kit Jenvey IRTB |
Très intéréssant! Combien de temps dur cette offre? |
Auteur : | Max @ REV9 [ Ven 2 Sep 2011, 05:41 ] |
Sujet du message : | Re: [REV9 Autosport] Group Buy : Kit Jenvey IRTB |
ToM57730 a écrit : Très intéréssant! Combien de temps dur cette offre? Je dirais environ 1 à 2 mois. |
Auteur : | jadys [ Ven 2 Sep 2011, 23:05 ] |
Sujet du message : | Re: [REV9 Autosport] Group Buy : Kit Jenvey IRTB |
Bonjour, Il faut six acheteurs minimum pour avoir le prix de 1249,99$ ou bien six acheteurs pour chaque configuration précise par exemple six acheteurs NB 1,8l ? Est-ce que le colis sera posté d'Angleterre puisque Jenvey est anglais pour nous éviter les frais de douane ou bien le posterez-vous d'Amérique du Nord ? Merci |
Auteur : | Max @ REV9 [ Sam 3 Sep 2011, 14:53 ] |
Sujet du message : | Re: [REV9 Autosport] Group Buy : Kit Jenvey IRTB |
jadys a écrit : Bonjour, Il faut six acheteurs minimum pour avoir le prix de 1249,99$ ou bien six acheteurs pour chaque configuration précise par exemple six acheteurs NB 1,8l ? Est-ce que le colis sera posté d'Angleterre puisque Jenvey est anglais pour nous éviter les frais de douane ou bien le posterez-vous d'Amérique du Nord ? Merci Le transport d'Angleterre peut facilement être fait sans problème. Le prix est maintenant XXXX$ parce qu'on a atteint les 6 acheteurs! |
Auteur : | Max @ REV9 [ Mer 7 Sep 2011, 16:53 ] |
Sujet du message : | Re: [REV9 Autosport] Group Buy : Kit Jenvey IRTB |
Available accessories Please note that there are already some airhorns included in the JENVEY KIT. (1) Price if 1 in total group buy sold, (2+) price is 2+ in group buy sold. JENVEY (click for picture) Air horns (cheapest) : (1) $104.99 ; (2+) $XXX ... there are many choices between those 2 options Air horns (most expensive) : (1) $309.99 ; (2+) $XXX Jenvey airbox + backplate : (1) $174.99 ; (2+) $XXX JUBIRIDE (click for picture) Jubiride MESH low-profile filter : (1) : $114.99 ; (2+) : $XXX Jubiride air cleaner set : (1) : $359.99 ; (2+) : $XXX Jubiride 90mm aluminum trumphets : (1) : $159.99 ; (2+) : $XXX |
Auteur : | Max @ REV9 [ Mer 7 Sep 2011, 16:54 ] |
Sujet du message : | Re: [REV9 Autosport] Group Buy : Kit Jenvey IRTB |
************************************************** ******* OFFICIAL BUYER LIST ************************************************** ******* JENVEY NA 1.6 IRTB KIT 1. Good Enough 2. owm (Singapore) 3. 4. 5. JENVEY NA 1.8 IRTB KIT 1. Venice 2. oztrackdays (Australia) 3. EvDog 4. Manusdei (Australia) 5. JENVEY NB 1.8 IRTB KIT 1. elitee (with MS) 2. jadys 3. jdmfc3s90 4. bayside blue 5. |
Auteur : | tom [ Mer 7 Sep 2011, 19:25 ] |
Sujet du message : | Re: [REV9 Autosport] Group Buy : Kit Jenvey IRTB |
J'ai une question con mais pour mon information personnelle c'est quoi? et ça apporte quoi? |
Auteur : | Max @ REV9 [ Sam 10 Sep 2011, 22:55 ] |
Sujet du message : | Re: [REV9 Autosport] Group Buy : Kit Jenvey IRTB |
tom a écrit : J'ai une question con mais pour mon information personnelle c'est quoi? et ça apporte quoi? Plus de puissance, plus de son, meilleur sensation de la pédale. |
Auteur : | Max @ REV9 [ Mar 11 Oct 2011, 03:31 ] |
Sujet du message : | Re: [REV9 Autosport] Group Buy : Kit Jenvey IRTB |
Seulement que 5 jours restant pour entrer dans l'achat de groupe! |
Auteur : | jadys [ Ven 25 Nov 2011, 22:49 ] |
Sujet du message : | Re: [REV9 Autosport] Group Buy : Kit Jenvey IRTB |
Bonjour Max, Le colis est arrivé, c'est bien beau tout ça. Sacré séance de mécano en vue. Merci encore. Jean-Michel |
Page 1 sur 1 | Le fuseau horaire est UTC [Heure d’été] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |