I didn't like the shiny satin surround of the gear stick gaiter so I purchased some 3M Di-Noc Carbon Fibre Vinyl Wrap CA-421 fiber

Before:


I removed the surround and applied the "carbon fibe" wrap, using a hairdryer to warm the edges to mould the shape.

After:

Good job! I like the result.
I assume you took it apart before?

Merci.....

Yes, I had most of the dash apart when I installed my reversing camera.

Sympa la modif.
Moi je voudrais "plastidiper" cette pièce. Si quelqu'un sait comment la sortir. Je suis arrivé à dégrafer les cotés mais pas le devant. En fait, j'ai pas trop insisté par peur de tout cassé.

Have a look here.... http://mazdaman.x10host.com/SM356197/

Once the panel is off, release the 4 white clips holding the trim on.

well done, nice job !

Pas mal du tout. Je crois l'avoir vu en vrai carbone mais le prix ... aie

nb : oui, certains n'aiment pas les "imitations" ...

Mine was the cheap option at £5.00 from eBay...